add mx8500 for 25.12.2

Signed-off-by: Zhe Yuan <yuanzhe1999@outlook.com>

add-openwrt-packages.sh

@@ -5,7 +5,9 @@
 #   ./add-openwrt-packages.sh packages.txt
 # Description:
 #   - Reads package names from a text file (supports both newline or space separation)
-#   - Adds missing CONFIG_PACKAGE_xxx=y entries to .config
+#   - Supports ##built-in and ##module sections to control build mode (=y or =m)
+#   - Packages default to built-in (=y) if no section header is specified
+#   - Adds missing CONFIG_PACKAGE_xxx entries to .config
 #   - Keeps existing settings intact
 #   - Reports missing packages
 #   - Runs make defconfig at the end to sync dependencies
@@ -81,28 +83,52 @@ package_exists() {
 
 echo "📦 Reading packages from $PKG_FILE ..."
 
-# Read package tokens from file, while allowing inline comments.
+# Parse the file into "package:mode" pairs, respecting ##built-in / ##module sections.
-PACKAGES=$(awk '{ sub(/#.*/, ""); for (i = 1; i <= NF; i++) print $i }' "$PKG_FILE")
+# Default mode is "y" (built-in). Inline comments (#xxx but not ##) are stripped.
+ENTRIES=$(awk '
+  BEGIN { mode = "y" }
+  /^##built-in/ { mode = "y"; next }
+  /^##module/   { mode = "m"; next }
+  {
+    sub(/#[^#].*/, "")   # strip inline comments (single #), preserve ## headers
+    for (i = 1; i <= NF; i++) print $i ":" mode
+  }
+' "$PKG_FILE")
 
 ADDED=()
+UPGRADED=()
 MISSING=()
 
-for pkg in $PACKAGES; do
+for entry in $ENTRIES; do
+  pkg="${entry%:*}"
+  mode="${entry##*:}"
   CONFIG_NAME="CONFIG_PACKAGE_${pkg}"
 
-  # Skip if already built-in
+  if [ "$mode" = "y" ]; then
+    # --- built-in mode ---
     if is_already_builtin "$pkg"; then
       echo "✅ Already built-in: $pkg"
       continue
     fi
 
-  # Upgrade module to built-in
     if is_module "$pkg"; then
       sed -i "s/^CONFIG_PACKAGE_${pkg}=m$/CONFIG_PACKAGE_${pkg}=y/" .config
-    ADDED+=("$pkg")
+      UPGRADED+=("$pkg")
       echo "⬆️  Module → built-in: $pkg"
       continue
     fi
+  else
+    # --- module mode ---
+    if is_module "$pkg"; then
+      echo "✅ Already module: $pkg"
+      continue
+    fi
+
+    if is_already_builtin "$pkg"; then
+      echo "✅ Already built-in (keeping): $pkg"
+      continue
+    fi
+  fi
 
   # Check if package exists in OpenWrt package metadata.
   if ! package_exists "$pkg"; then
@@ -112,9 +138,9 @@ for pkg in $PACKAGES; do
   fi
 
   # Append package config
-  echo "${CONFIG_NAME}=y" >> .config
+  echo "${CONFIG_NAME}=${mode}" >> .config
-  ADDED+=("$pkg")
+  ADDED+=("$pkg (=${mode})")
-  echo "➕ Added: $pkg"
+  echo "➕ Added: $pkg (=${mode})"
 done
 
 # Run defconfig to sync dependencies
@@ -126,6 +152,8 @@ echo
 echo "✅ Done!"
 echo "📋 Packages newly added: ${#ADDED[@]}"
 [ ${#ADDED[@]} -gt 0 ] && echo "  → ${ADDED[*]}"
+echo "📋 Packages upgraded to built-in: ${#UPGRADED[@]}"
+[ ${#UPGRADED[@]} -gt 0 ] && echo "  → ${UPGRADED[*]}"
 if [ ${#MISSING[@]} -gt 0 ]; then
   echo "⚠️  Packages not found (check feeds or spelling):"
   for m in "${MISSING[@]}"; do

add-openwrt-packages_old.sh

@@ -0,0 +1,134 @@
+#!/bin/bash
+# Add specified OpenWRT packages (from a text file) to .config without removing existing ones
+# Author: Zhe Yuan
+# Usage:
+#   ./add-openwrt-packages.sh packages.txt
+# Description:
+#   - Reads package names from a text file (supports both newline or space separation)
+#   - Adds missing CONFIG_PACKAGE_xxx=y entries to .config
+#   - Keeps existing settings intact
+#   - Reports missing packages
+#   - Runs make defconfig at the end to sync dependencies
+
+set -e
+umask 022
+
+# Check argument
+if [ "$#" -ne 1 ]; then
+  echo "❌ Usage: $0 <package_list.txt>"
+  exit 1
+fi
+
+PKG_FILE="$1"
+
+# Verify file exists
+if [ ! -f "$PKG_FILE" ]; then
+  echo "❌ Error: File not found: $PKG_FILE"
+  exit 1
+fi
+
+# Verify we are in OpenWRT source root
+if [ ! -d "package" ] || [ ! -f "Makefile" ]; then
+  echo "❌ Error: Please run this script in the OpenWRT source root directory."
+  exit 1
+fi
+
+# Ensure .config exists
+if [ ! -f ".config" ]; then
+  echo "⚙️  Generating initial .config..."
+  make defconfig
+fi
+
+PACKAGE_INDEX="tmp/.config-package.in"
+PACKAGE_INFO="tmp/.packageinfo"
+
+# Ensure package metadata exists for reliable package name lookups.
+if [ ! -f "$PACKAGE_INDEX" ] && [ ! -f "$PACKAGE_INFO" ]; then
+  echo "⚙️  Generating package metadata..."
+  make defconfig >/dev/null
+fi
+
+is_already_builtin() {
+  local pkg="$1"
+
+  awk -v package_y="CONFIG_PACKAGE_${pkg}=y" \
+      -v default_y="CONFIG_DEFAULT_${pkg}=y" \
+      '$0 == package_y || $0 == default_y { found=1; exit }
+       END { exit !found }' .config
+}
+
+is_module() {
+  local pkg="$1"
+
+  grep -qx "CONFIG_PACKAGE_${pkg}=m" .config
+}
+
+package_exists() {
+  local pkg="$1"
+
+  if [ -f "$PACKAGE_INDEX" ] &&
+    awk -v key="PACKAGE_${pkg}" '$1 == "config" && $2 == key { found=1; exit }
+      END { exit !found }' "$PACKAGE_INDEX"; then
+    return 0
+  fi
+
+  if [ -f "$PACKAGE_INFO" ] && grep -Fqx "Package: $pkg" "$PACKAGE_INFO"; then
+    return 0
+  fi
+
+  return 1
+}
+
+echo "📦 Reading packages from $PKG_FILE ..."
+
+# Read package tokens from file, while allowing inline comments.
+PACKAGES=$(awk '{ sub(/#.*/, ""); for (i = 1; i <= NF; i++) print $i }' "$PKG_FILE")
+
+ADDED=()
+MISSING=()
+
+for pkg in $PACKAGES; do
+  CONFIG_NAME="CONFIG_PACKAGE_${pkg}"
+
+  # Skip if already built-in
+  if is_already_builtin "$pkg"; then
+    echo "✅ Already built-in: $pkg"
+    continue
+  fi
+
+  # Upgrade module to built-in
+  if is_module "$pkg"; then
+    sed -i "s/^CONFIG_PACKAGE_${pkg}=m$/CONFIG_PACKAGE_${pkg}=y/" .config
+    ADDED+=("$pkg")
+    echo "⬆️  Module → built-in: $pkg"
+    continue
+  fi
+
+  # Check if package exists in OpenWrt package metadata.
+  if ! package_exists "$pkg"; then
+    echo "⚠️  Package not found: $pkg"
+    MISSING+=("$pkg")
+    continue
+  fi
+
+  # Append package config
+  echo "${CONFIG_NAME}=y" >> .config
+  ADDED+=("$pkg")
+  echo "➕ Added: $pkg"
+done
+
+# Run defconfig to sync dependencies
+echo
+echo "⚙️  Running make defconfig..."
+make defconfig >/dev/null
+
+echo
+echo "✅ Done!"
+echo "📋 Packages newly added: ${#ADDED[@]}"
+[ ${#ADDED[@]} -gt 0 ] && echo "  → ${ADDED[*]}"
+if [ ${#MISSING[@]} -gt 0 ]; then
+  echo "⚠️  Packages not found (check feeds or spelling):"
+  for m in "${MISSING[@]}"; do
+    echo "   - $m"
+  done
+fi

config_25.12.2/packages_cudy_tr3000_v1_25.12.2.txt

@@ -1,3 +1,9 @@
+##built-in
+
 apk-mbedtls base-files ca-bundle dnsmasq dropbear firewall4 fitblk fstools kmod-crypto-hw-safexcel kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad kmod-usb3 kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware luci luci-app-attendedsysupgrade
-curl yq unzip ip-full kmod-inet-diag kmod-nft-socket kmod-nft-tproxy kmod-tun luci-app-upnp luci-app-ttyd luci-app-filemanager luci-app-wol luci-app-mwan3 iptables-nft ip6tables-nft tailscale zerotier adguardhome
+iptables-nft ip6tables-nft curl yq unzip ip-full kmod-inet-diag kmod-nft-socket kmod-nft-tproxy kmod-tun
+
+luci-app-upnp luci-app-ttyd luci-app-filemanager luci-app-wol luci-app-mwan3 tailscale zerotier adguardhome
 easytier luci-app-netspeedtest luci-app-easytier
+
+##module

config_25.12.2/packages_linksys_mx8500_25.12.2.txt

@@ -1,3 +1,8 @@
+##built-in
+
 apk-mbedtls ath11k-firmware-ipq8074 base-files ca-bundle dnsmasq dropbear e2fsprogs firewall4 fstools kmod-ath11k-ahb kmod-fs-ext4 kmod-gpio-button-hotplug kmod-leds-gpio kmod-nft-offload kmod-phy-aquantia kmod-qca-nss-dp kmod-usb-dwc3 kmod-usb-dwc3-qcom kmod-usb3 libc libgcc libustream-mbedtls logd losetup mtd netifd nftables odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-basic-mbedtls kmod-leds-pca963x ipq-wifi-linksys_mx8500 kmod-ath11k-pci ath11k-firmware-qcn9074 kmod-hci-uart luci luci-app-attendedsysupgrade
-curl yq unzip ip-full kmod-mtd-rw kmod-inet-diag kmod-nft-socket kmod-nft-tproxy kmod-tun luci-app-upnp luci-app-ttyd luci-app-filemanager luci-app-wol luci-app-mwan3 iptables-nft ip6tables-nft luci-app-openvpn luci-proto-wireguard luci-app-cloudflared qrencode tailscale zerotier adguardhome
+curl yq unzip ip-full kmod-mtd-rw kmod-inet-diag kmod-nft-socket kmod-nft-tproxy kmod-tun luci-app-upnp luci-app-ttyd luci-app-filemanager luci-app-wol luci-app-mwan3 iptables-nft ip6tables-nft 
+
+luci-app-openvpn luci-proto-wireguard luci-app-cloudflared qrencode tailscale zerotier adguardhome
 easytier luci-app-netspeedtest luci-app-easytier
+##module